|
|
D.I.Y. (Do It Yourself) Moldable THERMOFITTING Teeth Whitening Trays
|
Average Rating:  (5 Reviews)
|
 |
Availability: |
| |
|
|
| |
|
|
|
From our affiliated sellers:
|
| 5 New: from $0.20 |
 |
| |
|
|
|
| Add Your Own Review |
 |
|
|
| Product Description: | | | | | Directions-PREFITTING PROCEDURE: Place one tray in your mouth placing on your upper teeth. Practice sucking the air from the tray. This is the procedure you will use when you retrieve the trays from the boiling water to contour the tray to the inside surface of your teeth. Do the same procedure with the other tray with your lower teeth.BOILING WATER: Boil a pan of water. Remove the water from the heat. Place the tray in the hot water by the tab. Leave in water for 3-4 seconds. FITTING THE TRAY:Lift the tray from the water using the tab. Quickly place the tray around the teeth and perform the same sucking procedure as practiced with the prefitting procedure. To avoid gel contact with the sensitive tissues of your mouth, take small scissorsand/or nail clippers and trim your trays on the gingival line (teeth/gum line). NOTE: This product does NOT include gel. To purchase gel please see our SmileMedic storefront. | |
| Customers' Reviews: | |
|
| | Great person to work with, quick svs. The product is OK. Fit isn't what I'd like it to be but they serve the purpose OK.
| | | The thermofitting teeth whitening trays work great. I have whitener from my dentist but didn't want to spend the $300 for the trays, so I decided to try these. Had never heard of them before ordering either.. Never knew that by putting the unmolded trays in boiling water that they could then inturn be fit to your teeth.
I had to dip them in the boiling water about 4 times, to get the best fit. And I didn't let my water cool down for a few minutes either, just after the water breaks boil, i removed from heat, and put the trays in until I saw they became very bendable!
I recommend these very much. The plastic material is a little bulky, but still great and fit well once you have them mastered!
| | | After dipping these into hot water and fitting them, they only covered just my front teeth (about from the canines forward if you're curious). I was really looking for something that was like a whole fitting mouth tray without having to pay a dentist $250.00 or whatever they charge to mold one.
If you just want something cheap to whiten your front teeth, then this product should do the job just fine. If you are looking for something to fit over all your teeth (molars included), then you may want to look elsewhere.
| | I don't know what to think of this product. | |
| | I tried the instruction, it worked but not that great. I don't think it's worth this much.
| | Moldable THERMOFITTING Trays | |
| | Are you kidding? For the price these are great! Just because some people are inept with the use of their hands doesn't mean that the trays don't work. Read the title "D.I.Y." That means that you are responsible for the fit of the trays - No, a dentist won't show up at your house, they won't fit right out of the package. You have to make them fit. What ever it takes.
I fitted mine several times before they were what I wanted. The instructions don't explicitly say that you can re-heat them and re-fit them but you can. I compared them to trays that my wife paid for from her dentist ~ $150 a piece! That's $300 for both. These are far better than the whitening strips - They do what they say; they hold the gel on your teeth. Stop whining. If you want "better" trays be prepared to pay.
| |
|
|
Home
View Cart
Bookmark This Page
Contact Us
