Customer Reviews:
Add Your Own Review |
|
 This is a must have for hikers, August 23, 2007
By Sno Hockey Coach (Snoqualmie Ridge, WA)
|
|
One of the problems with the out-of-the-box Camelbak is when it gets dropped (usually by one of my kids) and gets dirtied. Sure, you can clean it off, but it is a pain, and if I'm not careful my two year old is eating dirt. This cover is great at keeping the valve clean - easy to put on, easy to use, stays on. Come to think of it, why doesn't Camelbak include it as part of their product?
14 of 14 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
This is a must have for hikers, August 23, 2007
By Xbox Live Program Manager (Snoqualmie Ridge, WA)
|
|
One of the problems with the out-of-the-box Camelbak is when it gets dropped (usually by one of my kids) and gets dirtied. Sure, you can clean it off, but it is a pain, and if I'm not careful my two year old is eating dirt. This cover is great at keeping the valve clean - easy to put on, easy to use, stays on. Come to think of it, why doesn't Camelbak include it as part of their product?
12 of 12 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
Should be standard on camelbaks, December 30, 2010
By No Name (United States)
|
|
I use this on my military issued camelbak. Everyone else in my unit was using the Camelbaks without any cover. That is just disgusting and unsanitary. We work in a dirty dusty environment and they would sip on their Camelbaks without rinsing the bite valve first. Camelbak should include this cover as standard on their bladders. Eight years ago, I bought a valve cover just like this one except it was tan at the store on base. I did not know that Camelbak sold covers until I spotted the item. I always thought it was unsanitary and resisted using the Camelbaks because the bite valve would get dirty so easily. So with the bite cover in place, I am more comfortable using the Camelbak. Recently, I purchased this blue one to use on my civilian camelbak. My military camelbak comes with the hydrolock and this cover fits fine. It also fits my civilian camelbak without the hydrolock. Installation is simple. Just pull the bite valve mouthpiece off the tube. Put the mouthpiece inside the bottom of the cover. Slide the bite valve mouthpiece back on the tube. Alternately, if you are using the standard Camelbak without the hydrolock, you can take the tube off the bladder from the bottom and slide the cover up the tube.
7 of 7 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
great addition for any camelbak, September 5, 2008
By R. Soon (CA)
|
|
I don't know about you, but I like to keep my mouthpiece clean. Especially if I'm trekking around and getting dirty. A little annoying to put on at first, be sure to use alcohol and really twist it on there. A good buy!
7 of 7 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
 Doesn't fit over the big bite valve, July 3, 2009
By 9 Lives (NJ)
|
|
I got this to go along with the CamelBak Better Bottle with Bite Valve. However, it doesn't fit over the big bite valve that comes on the bottle.
7 of 9 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
Great product. Read here for bite valve replacement instructions, February 16, 2011
By C. Joe (USA)
|
|
Simple to use and and a little hard to install. It does what it is meant to do.
To replace the bite valve, soak the bite valve in warm-hot water and this will help expand the plastic. (Remember to use alcohol around the Hydrolock.) After replacement, let it sit for a while and the plastic will shrink back into place creating a tight fit again.
Buy with confidence.
2 of 2 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
works great, November 18, 2009
By 20NfPr5R
|
|
works with my 2009 Camelbak Mule NV valve. installation instructions recommend using an alcohol swab to simply slide the valve/cover onto the hydrolock. i didn't use alcohol so it took some negotiating to get a good fit.
2 of 2 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
 Good, January 24, 2009
By It is me
|
|
Keeps your bite valve clean, however can be difficult to get the bite valve on with the cover in place.
1 of 1 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
great, December 30, 2009
By Amy Vee (Valencia, CA)
|
|
doesn't work with the camelback better bottle bite valve but shipping speed and cost were great
1 of 2 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
 This should come as standard, August 2, 2011
By John
|
|
This valve cover should come as standard like the military version so I don't have to spend $6.73 on a piece of plastic. Shame on Camelbak.
Was this review helpful to you?
|
|
|
|
Works Well, July 23, 2011
By M. Palmera (California)
|
|
It's a big bite valve cover that works as simply as it looks. Sturdy. Easy to attach and clean. Purchased a few. It's the quality I've come to expect from all Camelbak products. The item serves its purpose, period. This is a staple item for the outdoor enthusiast... no one wants a dirty bite valve!
Was this review helpful to you?
|
|
|
|
Great Cover..., July 7, 2011
By Summer Rose (Yosemite, California)
|
|
These are so easy to put on and work very well...When hiking in Yosemite, my bite valve would sometimes get a little dusty or if you sit your backpack down it may fall onto the dirt...
This protector works perfect...
Was this review helpful to you?
|
|
|
|
Keeps my camelback clean, difficult to put on, July 6, 2011
By Winnie Lai (New York, NY)
|
|
This is an awesome cap but really hard to put on! I followed the advice of putting rubbing alcohol on it as well as the suggestion to put it in hot water first. The hot water did not work but the rubbing alcohol seemed to have made it easier to get on (I had to put a good amount of rubbing alcohol on in order for the cap to slide on to the valve). Despite the difficulty of getting it onto my bite valve, it keeps it clean when hiking and when I am storing my camelback at home. I would highly recommend it to anyone considering the fact that you really only have to go through the pains of putting it on once.
Was this review helpful to you?
|
|
|
|
GREAT product! A hassle to put on, but then you'll be so happy you did!, April 4, 2011
By Silence is golden. Duct tape is .. (San Diego, CA)
|
|
I found this after bringing my camelbak caving (in mud caves) and not drinking for a day because of all of the dust and grime in my bite valve. All well.
I am so happy I found this. It works beautifully. Getting it on my big bite valve was a bit of a hassle (had to take it apart, reassemble) and when I get a hydrolock I'll have to do it again, but it's totally worthit.
It stays attached to the bite valve and closed, and has survive scrapes, drops, and getting dragged. Most importantly, it keeps all of the nasty dirt out of your bite valve! Oh glorious, clean water!
I have gotten one for each of my camelback bladders, and got my dad and brother ones for their camelbaks as well. They LOVE it. Definitely a must for hikers or people with kids! I recommend this to all of my friends.
Was this review helpful to you?
|
|
|
|
Best addition to my Camelbak!, March 2, 2011
By RW
|
|
Pros: I cannot tell you how many times I have set my pack down and the bike bite valve ended up in the dust. Then you either eat sand or have to waste water to wash off the bite valve. This bite valve cover has saved me on many occasions
Cons: When mountain biking, remember to uncap it at the start of your ride so that you don't have to struggle with it when barreling downhill. It is a minor inconvenience to have the open cover flapping around - but well worth it.
Was this review helpful to you?
|
|
|
|
Works great, February 28, 2011
By bk26 (United States)
|
|
Bought this for my Camelbak Mule. It worked like a charm. No more worries of where I sit my pack down. Was always getting the bite vlave dirty before.
Was this review helpful to you?
|
|
|
|
Just get it, February 11, 2011
By miguel celis (FOUNTAIN VALLEY, CA, US)
|
|
As many people have mentioned, this should be included in all the set ups. You will eventually put your Camelbak down and you will get dirt on the mouthpiece. Just get one, its well worth it.
Was this review helpful to you?
|
|
|
|
How is this not standard equipment for Camelbak bags???, September 13, 2010
By Justin Wu (Miami)
|
|
It keeps your big bite valve clean. When I bought my HAWG NV 2010 bag my only complaint is that I was constantly worried about how I set the bag down and positioning it just so that the valve wouldn't touch the ground. Now I can just plop it on the ground and not have to worry about it. Also prevents the valve from opening and spilling water out. Why isn't this thing standard equipment?
Was this review helpful to you?
|
|
|
|
Nice and clean, June 4, 2010
By Joe (NH)
|
|
This cover fits tightly and closes securely, Your camelbak hose
will come in contact with the ground at some point, This cover protects
the bite valve so you don't have to worry about contamination or a dirty
gritty mouthpiece. Worth the extra bucks.
Was this review helpful to you?
|
|
|
|
Does What Was Stated - Protect The Bite Valve!, May 4, 2010
By Master Q
|
|
It is a little costly when compared to other brand that comes with a cover. It was a pain to put into the bite valve because there little bit of room for it. By wetting the tube with water helps somewhat.
Was this review helpful to you?
|
|
|
|
great for mini mule too, March 3, 2010
By A. M. Volk
|
|
My daughter took the Camelbak mini-mule with her to Disney, and I cringed every time her mouthpiece hit the floor of a ride. This is a perfect cover! It opens and closes easily for a child to use it.
Was this review helpful to you?
|
|
|
|
., September 20, 2009
By S. Alfonso (NY NY)
|
|
Good product. Does what it is meant to do - keep mouth bite clean on camelbak. It was a little hard to put on. It also leaked a little but that's probably because I never got it on properly. Price - ok. Same price at local store and could have saved on shipping. But overall it was good buy.
Was this review helpful to you?
|
|
|
|
Didn't fit water bottle, May 18, 2011
By Human
|
|
I ordered this thinking it would fit the normal camelbak bite valve cover and it didn't. It clearly says Big Bite on it but i wasn't sure of that at the time since it was my first camelbak purchase. Three stars isn't really fair because i don't know how the product works due to my mistake and it not fitting my bottle.
0 of 1 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
Camelbak Bite Cover, June 17, 2010
By T. J. Labey
|
|
someone please tell me how this is supposed to work? i must've purchased a dozen camelbak bottles and even own the water bladder backpack/hydration system but this cap doesn't fit any of them.
0 of 3 people found the above review helpful.
Was this review helpful to you?
|
|
|
|
Worth it's weight in gold, September 28, 2011
By C Mayes (San Diego, California United States)
|
|
Best thing that I bought for a hiking vacation! The bit valve was always clean even after setting my pack in the dirt.
Was this review helpful to you?
|
|
|
|
Does what it's supposed to, September 27, 2011
By Brian Bailey (WI United States)
|
|
Like other reviewers stated, this is something that should come STANDARD on all CamelBak systems. It took me quite awhile to get it on because you have to remove the bite valve, slide this on, and then slide the bite valve back on. Sounds easy in theory. But the tolerance is so tight (so the bite valve doesn't come off), that it didn't fully slide back on all the way very easily. After spending more time than one should, I was finally able to slide it on all the way. Maybe it's just me, who knows. But once it's on, it's definitely worth having. Keeps your bite valve nice and clean.
Was this review helpful to you?
|
|
|
|
wrong bite valve :(, August 29, 2011
By Fran (Long Island, New York United States)
|
|
This does not fit the regular Camalbak Bite Valve I didn't realize this till I received it, opened it and then couldn't get it to fit. I didn't even know there was more then one size bite valve.
Was this review helpful to you?
|
|
|
|
Beware! This works for the hydration system NOT the water bottle, January 26, 2012
By J. Remsen (Dover, MA)
|
|
This product is designed for the Big Bite Valve which comes with the Camelbak hydrations systems, NOT the regular bite valve that comes on a CamelBak BPA-Free Better Bottle with Bite Valve or a Camelbak Better Insulated Bottle. Despite the description which states that it fits "a standard or Big Bite valve", it does not fit the bite valve on a the typical Camelbak bottle. I'm sure it is an excellent product for the hydration systems, but do not buy it as a solution to cover the bite valve on a Camelbak water bottle.
Was this review helpful to you?
|
|
|
|
 Complete waste of money !!, January 25, 2012
By Carla (Costa Rica)
|
|
I bought these valves for my two camel backpacks and wasted my money. First, I thought that since they were from the same brand, it will fit perfectly... it doesn't! the Cap keeps opening and then the purpose of protecting the valve is not achieved.
Second, for one of my camels waterbags, I was not able to plug in the valve base, since the tube was wider, so I just placed the cover on top and ... guess what happened? it fell down and I lost it on the trail.
Don't buy this on the web, unless you are able to try it first at the shop.
Was this review helpful to you?
|
|
|
|
No Brainer!, January 9, 2012
By William Faircloth (USA)
|
|
While I agree with the multiple reviews that suggest this item should be included with CamelBaks as a standard feature, I can't let that detract from the item's performance.
I was lucky and this fit easily on the first try. Comes off without much fuss for thorough cleaning, but stayed on most of the season.
As far as I'm concerned, this thing paid for itself after about 3 hikes: no dirt/dust on the bite valve and no worrying about where I drop my pack. It seems like it will last as long as my CamelBak, so I'm happy with the purchase.
Was this review helpful to you?
|
|
|
|
Required addition to any Camelbak, December 1, 2011
By Roger
|
|
This bite valve cover is a must for any Camelbak. Think about it -- you put your mouth on and suck water from a valve that's hanging from your backpack while you're hiking or running or whatever. That valve's going to be in contact with everything, and if you ever put the Camelbak on the ground, that valve might just rub all up on the ground. I'm sure you wouldn't drink water from the ground, so don't drink from your valve that's been exposed to everything. This cover keeps your valve clean, and is easy to operate. I haven't had any issues popping it open and closing it while on runs or bike rides. I highly recommend this bite valve cover.
Was this review helpful to you?
|
|
|
|
Home
View Cart
Bookmark This Page
Contact Us
